Blocked Exits and Stairwell Storage
Blocked exits and stairwells deserve prompt attention because occupants need a usable escape route. Look for stored furniture, bicycles, maintenance supplies and other items that obstruct the required means of egress. This article does not rank violations by national frequency or severity.
Review exit hardware and exit marking as well as stored items. Unauthorized locks or changes to required door operation need qualified evaluation. Include emergency lighting and exit signs in the property’s inspection and test program.
Arrange emergency-lighting tests using the approved procedure and qualified personnel. Do not turn off building lighting or otherwise compromise occupied escape routes for an informal walkthrough.
Address egress and fire-door findings promptly, while continuing to track all other required fire protection work. A pre-inspection walkthrough can identify visible concerns; it does not replace required inspections, tests or qualified evaluation.
Use recurring walks and clear resident communication to keep required routes free of storage. Record findings, assign corrective work and verify that the condition stays corrected.
What Inspectors Look For on Fire Doors
A qualified fire-door inspection checks the applicable assembly, including its closing and latching functions. Approved automatic-release hold-open arrangements can be permitted; they are not equivalent to a wedge that defeats closing. Evaluate the installed assembly under its listing and applicable requirements.
Look for disconnected or damaged closers, unauthorized wedges or stops, and doors that do not perform their required closing and latching functions. Have defects evaluated and corrected by qualified personnel.
Also review labels, clearances, glazing, frames and hardware. Missing or illegible labels require evaluation; do not infer a rating solely from the door’s appearance.
Drilling, hardware changes, glazing work and flooring changes can affect a rated assembly. Some modifications may be permitted under the listing or an approved evaluation. Obtain qualified review before altering a fire door instead of assuming every change is either harmless or automatically disqualifying.
Sprinkler Obstructions and Painted Heads
Check that storage and other obstructions meet the clearance and discharge requirements for the installed sprinkler design. The correct clearance depends on the application; do not assume one distance covers every sprinkler and storage arrangement.
Painting near sprinklers can contaminate or damage them. Protect equipment using the appropriate work procedure and arrange qualified inspection if overspray or damage is suspected.
Have painted or damaged sprinklers evaluated for required replacement. Dust or other deposits need a condition-specific assessment: some cleaning may be permitted under the applicable standard and manufacturer instructions. Do not paint, scrape or clean sprinklers using an improvised method.
Missing cover plates or escutcheons should be checked against the sprinkler’s listing and installation requirements. Use compatible listed parts and a qualified sprinkler provider; do not substitute a cosmetic part without confirming suitability.
Fire Extinguisher Inspection Requirements
Create an extinguisher schedule using the locally adopted requirements and the installed types. OSHA 1910.157 separately requires monthly visual inspections and annual maintenance checks in workplaces within its scope. Do not treat those workplace provisions as the complete rule for every residential common area.
Check accessibility, mounting, visible damage and pressure indications where fitted. A qualified provider should confirm that each extinguisher is suitable for its hazard and that type-specific maintenance and hydrostatic testing are current.
For a used or refurbished extinguisher, confirm its listing, condition and service history before accepting it. The purchase label alone does not establish serviceability.
If required dates or records cannot be established, have the service provider determine the appropriate response. Repair, testing or replacement depends on the unit and the applicable requirements.
Current service records are useful, but they do not replace checking access and condition. Review the equipment and documentation together.
Alarm Trouble Signals Nobody Clears
A trouble signal identifies a condition that needs investigation. It does not by itself establish that the entire system is inoperative. Qualified personnel should assess the affected functions and determine whether impairment procedures or other protective measures are required.
Silencing the audible trouble indication does not correct its cause. Record the condition, notify the responsible service provider and track investigation through restoration.
Changes to telephone, internet or network services can affect alarm communications. Coordinate them with the alarm provider and supervising station, and verify the required functions after the work.
Review the event history and open service findings as part of routine oversight.
Hydrants, FDCs, and Backflow Access
Keep required access to fire department connections clear and inspect their visible condition under the applicable procedure. Have missing or damaged protective caps and other defects evaluated for correction.
Include private hydrants and other exterior fire protection equipment in the inventory. Assign responsibility for access, inspection and corrective work rather than assuming another department covers them.
For backflow assemblies, confirm both fire protection and water-authority requirements, including test scope, qualifications and any reporting obligations. Keep access clear and retain the appropriate records.
A Multifamily Inspection Action List
Use this worksheet to assign review and corrective work. It is not a complete code inspection checklist or a promise that an authority will approve the property.
| Review area | What to check | Who should coordinate the response |
|---|---|---|
| Egress and stairwells | Obstructions, required door operation, exit marking | Property manager; escalate safety-critical findings promptly |
| Fire doors | Required closing/latching, labels, clearances and modifications | Qualified fire-door personnel |
| Sprinklers | Damage, deposits, obstructions and missing listed parts | Qualified sprinkler provider with required credentials |
| Extinguishers | Access, condition, suitability and service history | Qualified extinguisher provider |
| Alarm system | Open trouble conditions, test findings and communications | Qualified alarm provider and supervising station |
Confirm the provider’s current service coverage, licensing and task-specific qualifications for the property. Request a written scope and a process for tracking findings to closure.
How to Prepare for a Multifamily Fire Inspection
Review the authority’s published guidance and the latest service reports before the visit. A property walkthrough can identify visible concerns, but assign specialized testing and repairs to appropriately qualified personnel.
Keep recurring problems on a follow-up list. Resident communication, access control and regular review can support corrective work, but no single administrative measure guarantees that a hazard will not recur.
Allow time before the inspection for evaluation, parts, access arrangements and corrective work. Do not assume every finding can be resolved during a same-day walkthrough.
Keep Inspection and Correction Records Available
Maintain the inspection, testing and maintenance records required for the property’s systems. Ask which reports the authority needs, in what format and through which submission process. Missing documentation requires follow-up, but inspection outcomes depend on the applicable requirements and findings.
During a management handover, obtain the records required by the applicable retention rules, along with design documents and open findings. Do not limit the request to an arbitrary two-year window.
Keep evidence of corrective work with the original finding so the next manager or reviewer can see what changed and whether any required verification was completed.
Treat Emergency Responder Radio Coverage Separately
Where emergency responder radio coverage requirements apply, establish the relevant design, testing and maintenance scope with qualified personnel and the authority having jurisdiction.
Required radio coverage depends on the applicable rules, local radio system and building conditions. Confirm whether a survey or system is required and when approval is needed; building construction alone does not establish a universal deadline or requirement.
Getting Ahead of the Next Inspection
Bring the latest reports and open findings to a discussion with SuperHero Fire Protection. Confirm the property’s location, installed systems and the inspection or service scope needed.
Request a written scope and a clear process for tracking corrective work. Call 678-804-6111 to discuss availability and scheduling; no service visit can guarantee what an authority will cite or approve.
By Robert Blake-Ward, Chief Executive Officer
Frequently Asked Questions
Review required egress routes, fire doors, sprinkler condition and obstructions, extinguisher readiness, alarm findings and the required records. These are useful review categories, not a verified ranking of the most frequent violations. The property’s approved design and governing requirements determine the full scope.
Use the adopted requirements and installed extinguisher types to establish the inspection and maintenance schedule. Applicable OSHA workplace provisions call for monthly visual inspection and annual maintenance checks, but they do not replace a review of residential and local requirements. Internal examination and hydrostatic intervals are type-specific.
Do not defeat required closing with a wedge or unauthorized stop. An approved automatic-release hold-open arrangement can be permitted when the assembly meets its applicable requirements. Have qualified personnel verify the installed configuration and required closing and latching functions.
Have qualified personnel investigate and determine which functions are affected. Silencing the sounder does not repair the condition. Follow any required impairment or protective-measure procedures and retain evidence of correction and restoration.